FMS FCX24 1/24TH CHEVROLET COLARADO TRUCK RTR - BLACK

FMS FCX24 1/24TH CHEVROLET COLARADO TRUCK RTR - BLACK

The Chevrolet Colorado is a pickup truck model produced by General Motors (GM).  It was first introduced in 2004 to fill the gap in the small pickup truck market for GM.

The Chevrolet Colorado is highly competitive and has a strong market advantage among similar pickup trucks. From basic utility to luxury models, from two-seaters to four-seaters, and from two-wheel drive to four-wheel drive, there are corresponding models for consumers to choose from. Its advantages in performance and handling are evident, such as high load-bearing capacity, powerful engine, and excellent suspension system. In addition, the wide range of applications is also an advantage of the Chevrolet Colorado. It is not only suitable for personal use, such as off-road and transportation, but also widely used for commercial purposes, such as construction, logistics, and farming.

The Chevrolet Colorado is of great significance in the development of the automotive industry. It represents the development trend of the automotive industry, which focuses more on the intelligence, sustainability, and environmental friendliness of vehicles to meet the ever-changing market demands. In addition, the Chevrolet Colorado has also become a symbol of fashion and personalisation, demonstrating consumers' continuous pursuit and innovation in life quality and personalised needs.

Authorized by General Motors, the 1/24 Chevrolet Colorado remote control model from FMS accurately captures the performance and handling advantages of the prototype vehicle. The chassis is made of high-strength nylon and the mid-mounted power unit has a low center of gravity, integrating the 2-speed gearbox, transfer case, and 370 high-speed brushed motor into one. The power is transmitted to the front and rear axles through the universal joint drive shaft, and the large, hollow tyres can provide good shock absorption. The two-speed gearbox switched by the third channel of the remote control can provide powerful torque and support high-speed off-road driving.

The RTR (Ready-to-Run) version contains everything you need - transmitter (requires battery), receiver, ESC, motor, servo, battery, and USB charger. There are three paint schemes to choose from. With your adventurous and free-spirited heart, embark on your off-road journey!

FEATURES

• Ready To Run Model
• Two Speed Transmission
• Ball Bearings Full Set
• Silk Screen Printing Pc Body
• Metal Gears Steering Servo
• Four Wheel Independent Suspension
• Front & Rear Axle Planetary Gear Differentials
• Rapid Separation Car Body
• Painted Body
• Original Personalised Stickers
• 2.4ghz Radio

SPECIFICATIONS

Radio Control: 118 x 73 x 145mm, 122g (Battery not Included)
Model Vehicle: 239x 161 x 108mm, 497g (Battery not Included)
Tyre: Φ 54.8×19.5mm
Wheel Base: 140mm
Minimum Ground Clearance: 37mm
Approach Angle: 66 °
Departure Angle: 53 °
Driving Speed: 26km/h Max
Remote Distance: 30m
Play Time: 20 minute

WHAT'S INCLUDED

• 1 x 1:24 FMT24 COlorado
• 1 x 2.4GHz Radio
• 1 x 2-in-1 Receiver / ESC (installed)
• 1 x 370 Brushed Motor (installed)
• 1 x 3-wire 9g Plastic Digital Servo (installed)
• 1 x 3-wire 13g Metal Servo (installed)
• 1 x 7.4V 900 mAh Battery
• 1 x USB Battery Charger
• 1 x Hex Wrench Socket
• 1 x Product Manual

NEEDED TO COMPLETE

• AAA Batteries for Radio