BUGGY CLUTCH SHOE & SPRING ASSEMBLY TOOL SET (W/KOS13207-GR HANDLE)
Register or login to view pricing
Features:
*Fine tuned to quickly install & remove clutch shoes
*Can be easily installed to a handle with 1/4″ (6.35mm) quick release bit holder
*Made of hardened steel
*KOS13207-GR GR Quick Release 1/4″ 6.35mm Drive Hex Driver Handle included
*Made In Taiwan
*Cars, parts, accessories & others are not included.*
Note: For use with 3 shoe clutches only.
Instructions:
When installing the clutch shoes, put the tool spring guide (hook) under the clutch spring. Turn the tool counter-clockwise to lift the spring above the clutch nut and push to seat the shoe. Then, turn clockwise to let the spring guide (hook) rotate out from beneath the clutch spring. In case the spring is not well seated, just use the top of the tool to push the spring and make it sit in the groove of the clutch nut.
To remove the clutch shoes, simply put the the spring guide (hook) under the clutch spring and rotate the tool counter-clockwise to lift the spring out of the clutch nut groove. Then, pull the tool off the crank to remove the clutch shoe and spring.
*Made In Taiwan
*Cars, parts, accessories & others are not included.*
(KOS13207-CLSET)
| SKU | KOS13207-CLSET |
| Brand | KOSWORK |
More From This Category
1/10 & 1/8 Buggy & On-Road Car Extra Lightweight Pit Setup Board 400x480mm
Register or login to view pricing
Mini-Z 4pcs Mini Car Tool Set (H1.5, N4.5, P00 & P1) 1/4" Drive Hex
Register or login to view pricing
Kyosho Rear Inner Hardened Hinge Pin/Suspension Shaft (2) (for 3x58mm) Mid Optima 2022
Register or login to view pricing
260X230X95MM ENGEINE & PIPE SET HARD FRAME BAG V2 (W/EVA HARD FOAM)
Register or login to view pricing