G.T. Power C6D Air 100W AC/DC 12A Intelligent Charger Discharger

The GT Power C6D Air AC/DC charger is an intelligent charger/discharger that is at the forefront of technology and intuitive display. It features a rapid charge/discharge with a built-in microprocessor and new software to make charging very easy. Supporting different types of batteries with easy operation makes this a must-have charger for any application. The built-in memory for different batteries makes set up fast and easy to start. Control and set up are done on the 4″ color high definition LCD display.

The C6D air has an “auto” function when charging/discharging batteries that protects the cells from overcharging. The C6DPro charger has a maximum output power of 300W (DC) and 100W (AC). It can charge up to 15 cells of Nicd/NiMh and up to 6S in LiPo/LiFe/LiIon/LiHV at one time with a max current of 12.0A. The charger has a built-in cooling fan to keep the electronics cool and long-lasting.

Feature:

• Battery repair mode
• An individual cell voltage balancer built-in for Lilo/LiPo/LiFe packs.
• Monitors and balances individual cells of the lithium battery pack during discharging.
• Variable charging: Fast charge which reduces the charge time of lithium batteries and storage mode.
• Variable modes: Fast charge mode, Storage Charge mode, Discharge Mode, Repair Mode
• Delta-Peak Detection: Stops charging when a full charge is detected on NiCd/NiMh batteries.
• Auto-charge Limit: This allows the user to set the limit of a charge current to avoid high current charging.
• Capacity Limit: When the charging capacity exceeds the limit the charger will shut down.
• Temperature Limit: The charger will shut down if the internal sensors reach an unsafe range.

• Specification:

• Specification: support to Lihv battery
• Built in tire warmer / Servo test/ Motor-run function    
• Battery reparing function/  Battery warmer function  
• Support AGM/PB battery                                                    
• Support Mobile Phone Scan QR code to Charge
• Input Voltage: AC 100-240V      DC 11-26V
• Charge Current: 0.1-12A
• Discharge Current: 0.1-3A 12A in FB-DIS model                                                                                                                   Charge Power: AC Max 100W   DC: Max 300W  
• Discharge Power: Max 5W   300W in FB-DIS model
• Balance Current: Max 1.0A
• LiPo/LiFe/Lilo/LIHV: 1-6 cells
• NIMH/NICd: 1-15 cells
• Pb(Lead acid):  2-20